AUTO STICKY NOTEPAD GLUING MACHINE INTRODUCTION
Product Specification
Sticky notepad making machine is specialized in producing all kinds of notepad, business notepad, memo pad, stickers and other adhesive to remain free to paste something essential products, it has nice outside looking, stable working, with the company of the punching machine and press machine can produce various shapes of N times notepad and any other notepads.
Main Technical Parameter
| Technical Data | AGST-680 | AGST-820 |
| Max. coating width | 640mm（四开） | 800mm（对开） |
| Paper length | 350-550mm | 350-550mm |
| Speed of coating | 0-25m/min | 0-25m/min |
| Oven temperature | 0-80℃ | 0-80℃ |
| Heating mode | Stainless steel heating pipe | Stainless steel heating pipe |
| Total power | 11.5KW | 12.5KW |
| Weight | 1500Kg | 1800Kg |
| Machine dimensions | 13800x1320x1500mm | 13800x1460x1500mm |
brief description of the machine structure
1. Notepad sticky machine by the feed conveyor, the plastic device, oven, conveyor belt splicing, to close paper frame.
2. Glue roller transmission frequency converter step speed regulation.
3. Roll cylinder pressure with traction control laminated.
4. By roller, scraper of the way with mobile Glue. By a different amount of glue, a variety of rollers are available.
5. Oven heated by the heating pipe.
6.Send and the current conveyor roller in synchronization.
7. Electrical control panel, by the voltmeter, ammeter, frequency converter, oven temperature, light, and operation of the button, the air switch.
8. Cylinder operating handle, mounted on the left side of feed conveyor belt.
the machine description
Overview: posted (sticky) pad gluing machine instructions.
The scope: AGST-680 notices posted coater operational processes.
The process flow：
1. arranged on the plastic gravure roller, tighten the two nuts.
2. would be transferred gravure squeegee roller, adjusted the angle, the blade weight is not too tight, it is appropriate to glue scraped the surface of the gravure roll without leaving glue appropriate.
3. adjusted position and put the paper sheet positioning belt.
4. aligning roller release agent transfer position.
5. disc loaded glue and glue. Elevated so that the glue plate gravure roll dipped in glue locations.
6. glue scraper mounted on the top down to the gravure roll vacant position.
7. fitted with a release agent plate, adding a release agent, regulate the balance of scraping roller, deploy removable adhesive and release agent, release agent with water 6:4, release agents and water must stir, has deployed a good solvent must be the day run out, otherwise it will degenerate. If the exact ever use must be sealed packaging.
instructions
1. Turn the power switch, start the machine, slow run.
2. Turn the heating power switch, the temperature to 45-55 ℃.
3. Start functioning circulating air blower oven.
4. The machine starts running, paper delivered to the rubber roller above, immediately press rollers pneumatic switch.
5. Paper placed on the conveyor belt in order to be the first one above each stack at 3-5mm.
6. If the paper stops feeding, on a timely basis pneumatic roller rises.
7. Behind the machine can separate collection of paper stacked one
8. Normal operation of the machine can not keep such materials or lunch, the host must be running on the rubber roller, can not be stopped, otherwise removable adhesive will precipitate uneven.
9. Machine operation completed, it must be cleaned on a rubber roller, rubber plate and so on.
10. Glued paper should be placed on the press machine flatten over two hours at least.
maintenance
prepared:
(1) Please except all of the obstacles around the machine check the equipment of various parts, cleaning roller, roller and scraper. Send by conveyor belt cleaning paper. Check electrical equipment, pneumatic air parts, should be complete well.
(2) glue into the tank, open the valve for the glue into the tray, the tray down to the lowest position before.
(3) Turn the power and gas compressed air.
(4) start the motor, for operating air equipment. Check whether it is normal operation. Open air switch for cylinder move up and down. Equipment is normal, be put into production.
(5) Regulation of conveyor belt:
a. feed conveyor belt from the back left and right two hand wheel, elastic and offset adjustment.
b. back-end conveyor belt splicing, have two cone called partial wheel, installed in the oven, the conveyor belt to be passed in the round bottom, left and right position adjustable.
c. then the front conveyor belt of paper, with left and right two hand wheel, adjustable elastic and migration.
d. conveyor belt should be adjusted to the appropriate elastic state. Not too tight, so as to avoid deviation.
